DuraVision 5050

About
DuraVision 5050 is a high transparency, MABS/TPU top sheet with a gloss top side and matte bottom side. It is designed for snowboard and ski construction and is suitable for silkscreen printing. Available Thickness: .020″ (.508mm) Available Widths: 13″ (330mm) Surface Treatment: Corona treated both sides&&

Product Description
Generic	ABS (Transparent )+ TPU
Material Status	Commercial: Active
Features	Good Clarity,Good surface appearance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.13	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	500	MPa	ASTM D882
tensile strength			ASTM D882
yield	18.0	MPa	ASTM D882
fracture	39.0	MPa	ASTM D882
Tensile strain
fracture	300	%	ASTM D882

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.