| About |
|---|
| Dyflor ME是一种聚偏二氟乙烯 (PVDF)材料,。 该产品在欧洲或北美洲有供货,加工方式为:注射成型、挤出或树脂传递成型。 Dyflor ME的主要特性有: Flame Retardant 耐热 良好的抗紫外线能力&& |
| Product Description | |
|---|---|
| Supplier | Evonik |
| Generic | PVDF |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Flame Characteristics,High Heat Resistance,V-0 |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.78 | g/cm³ | ISO 1183-1 |
| Melt Volume Rate | |||
| 230℃，5 kg | 2.00 | cm³/10min | ISO 1133 |
| Shrinkage rate | ISO 2577 1 | ||
| MD | 2.8 | % | ISO 2577-1 |
| TD | 2.2 | % | ISO 2577-1 |
| Water absorption rate | |||
| saturated | 0.040 | % | ISO 62-1 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1690 | MPa | ISO 527-2 1 |
| tensile strength | |||
| yield | 50.0 | MPa | ISO 527-2 1 |
| Tensile strain | |||
| yield | 9.0 | % | ISO 527-2 1 |
| Tensile strain | |||
| fracture | 48 | % | ISO 527-2 1 |
| Tensile creep modulus | ISO 899-1 1 | ||
| 1 hr | 1500 | MPa | ISO 899-1 1 |
| 1000 hr | 850 | MPa | ISO 899-1 1 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA 1 | ||
| -30℃ | 11.0 | kJ/m² | ISO 179/1eA 1 |
| 23℃ | 32.0 | kJ/m² | ISO 179/1eA 1 |
| Charpy impact strength | ISO 179/1eU 1 | ||
| -30℃ | 260 | kJ/m² | ISO 179/1eU 1 |
| 23℃ | 310 | kJ/m² | ISO 179/1eU 1 |
| Tensile Notch Impact Strength | |||
| 23℃ | 210 | kJ/m² | ISO 8256/1 1 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ISO 75-2 1 | ||
| 0.45 MPa | 130 | ℃ | ISO 75-2 1 |
| 1.8 MPa | 70.0 | ℃ | ISO 75-2 1 |
| Vicat Softening Temp | |||
| B50 | 138 | ℃ | ISO 306 1 |
| Melting temperature | 170 | ℃ | ISO 11357-3 1 |
| Linear coefficient of thermal expansion | ISO 11359-2 1 | ||
| MD | 1.3E-4 | 1/℃ | ISO 11359-2 1 |
| TD | 1.3E-4 | 1/℃ | ISO 11359-2 1 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.3E+12 | ohms | IEC 60093 1 |
| Volume resistivity | 1.3E+14 | ohms·cm | IEC 60093 1 |
| Electrical strength | 19 | kV/mm | IEC 60243-1 1 |
| Relative permittivity | IEC 60250 1 | ||
| 100 Hz | 10.6 | IEC 60250 1 | |
| 1 MHz | 6.40 | IEC 60250 1 | |
| Dissipation factor | IEC 60250 1 | ||
| 100 Hz | 0.026 | IEC 60250 1 | |
| 1 MHz | 0.29 | IEC 60250 1 | |
| Compared to the leakage tracing index | 600 | IEC 60112 1 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.60 mm | V-0 | ISO 1210 1 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |