| About |
|---|
| Dynaflex™ G7410-1000-00 is an easy processing, high performance compound designed for use in applications requiring a tough, durable material. Excellent Colorability Excellent Heat Stability Overmold Adhesion to Polypropylene Suitable For Outdoor Use&& |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Renewable resources,Heat Stabilized,Good coloring |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.898 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 1.8-2.2 | % | ASTM D995 |
| viscosity | 14.8 | Pa·s | ASTM D3835 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 2.0 | g/10min | ASTM D1238 |
| Other performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Screw speed | rpm | 25-75 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shaw’s A10s | 68 | ASTM D2240 | |
| tensile strength | 5.17 | MPa | ASTM D412 |
| tensile strength | 2.69 | MPa | ASTM D412 |
| tensile strength | 3.55 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 500 | % | ASTM D412 |
| tear strength | 28.0 | kN/m | ASTM D624 |
| Compression deformation | 19 | % | ASTM D395B |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Injection temperature | |||
| Rear barrel temperature | 166-204 | °C | |
| Central temperature of the barrel | 177-216 | °C | |
| Barrel front temperature | 182-221 | °C | |
| Die temperature | 182-221 | °C | |
| Mold temperature | 15.6-26.7 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C |
| 3. 2 hr |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |