| About |
|---|
| Dynaprene® VE0064A is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific for injection molding.&& |
| Product Description | |
|---|---|
| Supplier | Nantex |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.958 | g/cm³ | ASTM D792 |
| Water content | < 0.060 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 5 seconds | 66 | ASTM D2240 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strain | 11 | % | ASTM D412 |
| Tensile Strength | |||
| TD, yield | 5.80 | MPa | ASTM D412 |
| 100% strain | 2.30 | MPa | ASTM D412 |
| Tensile Strain | |||
| TD, fracture | 380 | % | ASTM D412 |
| Tear strength | |||
| 23℃ | 34.0 | kN/m | ASTM D624 |
| 100℃，22 hr | 28 | % | ASTM D395B |
| Aging property | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume change | |||
| 121 ℃, 24 hours, in IRM 903 oil | 77 | % | ASTM D471 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Brittle Temperature | < -60.0 | ℃ | ASTM D746 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion Molded | Nominal value | Unit | Test method |
| Injection Molding | Nominal value | Unit | Test method |
| Feed temperature | 20-50 | ℃ | |
| Barrel Zone 1 Temperature | 180-200 | ℃ | |
| Barrel Zone 2 Temperature | 180-200 | ℃ | |
| Barrel Zone 3 Temperature | 190-210 | ℃ | |
| Head temperature | 190-210 | ℃ | |
| Die Temperature | 195-215 | ℃ | |
| Screen Pack | 20-60 | mesh | |
| Screw Compression Ratio | 2.5-3.5 | ||
| Screw L/D Ratio | 24-30 | ||
| Rear Temperature Zone 1 | 175-200 | ℃ | |
| Middle Temperature Zone 2 | 175-200 | ℃ | |
| Front Temperature Zone 3 | 175-200 | ℃ | |
| Nozzle temperature | 190-205 | ℃ | |
| Mold Temperature | 10-65 | ℃ | |
| Screw Speed | 100-200 | rpm | |
| Back Pressure | 0.069-1.035 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |