| About |
|---|
| Static Dissipative Polycarbonate Features: Carbon Free Static Dissipative Performance Good Dimensional Stability Excellent Processability Applications: Industrial Electrical/Electronic Applications Automotive Packaging&& |
| Product Description | |
|---|---|
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Dimensional Stability,Antistatic property |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D638 | ||
| yield | 44.1 | MPa | ASTM D638 |
| fracture | 35.9 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 20 | % | ASTM D638 |
| fracture | > 100 | % | ASTM D638 |
| Bending modulus | 1720 | MPa | ASTM D790 |
| bending strength | 600 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 530 to 640 | J/m | ASTM D256 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+8 to 1.0E+11 | ohms | ASTM D257 |
| Electrostatic attenuation | < 2.0 | sec | NFPA 99 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 104 to 121 | °C | |
| Drying time | 3.0 to 5.0 | hr | |
| Barrel rear temperature | 221 to 232 | °C | |
| Barrel middle temperature | 227 to 238 | °C | |
| Barrel front temperature | 232 to 243 | °C | |
| Nozzle temperature | 232 to 243 | °C | |
| Processing (melt) temperature | 232 to 243 | °C | |
| Mold temperature | 38 to 82 | °C | |
| Injection pressure | 34.5 to 82.7 | MPa | |
| Drying temperature | 104 to 121 | °C | |
| Drying time | 3.0 to 5.0 | hr | |
| Barrel 1 zone temperature | 221 to 232 | °C | |
| Barrel 3 zone temperature | 227 to 238 | °C | |
| Barrel 5 zone temperature | 232 to 243 | °C | |
| Melt temperature | 232 to 243 | °C | |
| Nozzle temperature | 232 to 243 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |