| About |
|---|
| Antistatic Polyetheramid Compound Features: Permanently Static Dissipative Good Dimensional Stability Carbon Free Applications: Packaging Industrial Electrical/Electronic Applications&& |
| Product Description | |
|---|---|
| Generic | PA12弹性体 |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Antistatic property |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 to 1.10 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D638 | ||
| yield | 13.8 | MPa | ASTM D638 |
| fracture | 51.7 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 24 | % | ASTM D638 |
| fracture | > 500 | % | ASTM D638 |
| Bending modulus | 172 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 无断裂 | ASTM D256 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 5.0E+6 to 8.0E+8 | ohms | ASTM D257 |
| Volume resistivity | 5.0E+6 to 8.0E+8 | ohms·cm | ASTM D257 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 82 | °C | |
| Drying time | > 4.0 | hr | |
| Barrel rear temperature | 188 to 191 | °C | |
| Barrel middle temperature | 199 to 202 | °C | |
| Barrel front temperature | 199 to 202 | °C | |
| Nozzle temperature | 196 to 199 | °C | |
| Mold temperature | 32 to 38 | °C | |
| Injection pressure | 4.83 to 5.52 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |