E-Pos 530 - SOLIAO

About
E-Pos 530 is a new low viscosity bisphenol A epoxy resin diluted with an epoxidised alkyl phenol of natural source. Product characteristics E-Pos 530 exhibits low volatility and excellent crystallisation resistance. The low viscosity of the resin allows high filler loading and ensures good wetting thereof and of the substrate. The reactive diluent contained in the resin also acts as a flexibiliser, improving the mechanical properties, e.g. the impact resistance of the resin. E-Pos 530 shows excellent water and chemical resistance, excellent dimensional stability as well as maintained electrical characteristics. Product applications E-Pos 530 is used in combination with amine-based curing agents in the formulation of two-pack ambient curing systems. The good balance of properties which can be obtained with E-Pos 530 allows its use in various civil engineering applications such as floorings, mortars, grouts, laminates, adhesives, but also for the production of electrical castings and of solvent-free coatings.&&

About

E-Pos 530 is a new low viscosity bisphenol A epoxy resin diluted with an epoxidised alkyl phenol of natural source. Product characteristics E-Pos 530 exhibits low volatility and excellent crystallisation resistance. The low viscosity of the resin allows high filler loading and ensures good wetting thereof and of the substrate. The reactive diluent contained in the resin also acts as a flexibiliser, improving the mechanical properties, e.g. the impact resistance of the resin. E-Pos 530 shows excellent water and chemical resistance, excellent dimensional stability as well as maintained electrical characteristics. Product applications E-Pos 530 is used in combination with amine-based curing agents in the formulation of two-pack ambient curing systems. The good balance of properties which can be obtained with E-Pos 530 allows its use in various civil engineering applications such as floorings, mortars, grouts, laminates, adhesives, but also for the production of electrical castings and of solvent-free coatings.&&

Product Description
Generic	环氧树脂
Material Status	Commercial: Active
Features	Good Dimensional Stability,Low Viscosity,Moisture resistance,Solvent resistance
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Gardner color	< 8.00

Supplementary information	Nominal value	Unit	Test method
Epoxy equivalent	210 to 225	g/mol

Uncured Properties	Nominal value	Unit
Solid content	100	%
Density
20℃	1.10	g/cm³
viscosity
25℃	0.80 to 1.5	Pa·s

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.