E-Pos 674X90 - SOLIAO

About
E-Pos 674X90 is a semi-solid modified bisphenol A-based epoxy resin in xylene solution (90% m/m resin in xylene). E-Pos 674X90 has been developed for use in high-solids applications and is characterized by a high degree of flexibility and a reduced solution viscosity. Product applications E-Pos 674X90 is used at room temperature in combination with amine-based curing agents in the formulation of two-component systems. This resin has specifically been developed for use in high-solids coatings for metal or concrete protection. E-Pos 674X90 enables the formulation of anticorrosive paints with a solids content of up to 85% m/m at application viscosity. Compared to solventborne resins, E-Pos 674X90 has a low solution viscosity, allowing for high pigment and/or filler loading, and exhibits excellent flexibility and impact resistance. This combination renders this resin ideal for use in metal primers as well as in protective top-coats.&&

About

E-Pos 674X90 is a semi-solid modified bisphenol A-based epoxy resin in xylene solution (90% m/m resin in xylene). E-Pos 674X90 has been developed for use in high-solids applications and is characterized by a high degree of flexibility and a reduced solution viscosity. Product applications E-Pos 674X90 is used at room temperature in combination with amine-based curing agents in the formulation of two-component systems. This resin has specifically been developed for use in high-solids coatings for metal or concrete protection. E-Pos 674X90 enables the formulation of anticorrosive paints with a solids content of up to 85% m/m at application viscosity. Compared to solventborne resins, E-Pos 674X90 has a low solution viscosity, allowing for high pigment and/or filler loading, and exhibits excellent flexibility and impact resistance. This combination renders this resin ideal for use in metal primers as well as in protective top-coats.&&

Product Description
Generic	环氧树脂
Material Status	Commercial: Active
Features	Good flexibility,High impact resistance
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Gardner color	< 3.00

Supplementary information	Nominal value	Unit	Test method
Epoxy equivalent
on solids	250 to 270	g/mol

Uncured Properties	Nominal value	Unit
Solid content	90	%
Density
20℃	1.10	g/cm³
viscosity
25℃	2.0 to 4.0	Pa·s

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.