| About |
|---|
| Eastalite™ Foamed Copolyester MP007F with nonporous Eastar™ Copolyester 6763 skins is an opaque, amorphous material with a closed foam structure useful for medical packaging. It is normally white/pearlescent in appearance but may also be colored using Eastman resins and concentrates. Application/Uses Medical kits Medical mounting cards Opaque medical and pharmaceutical packaging Thermoformed packaging Work-in-process trays Key Attributes Can be recycled with other copolyesters for use in nonmedical post-consumer markets Color and functional stability following ethylene oxide (EtO), gamma or e-beam irradiation, or gas plasma sterilization Compliant with applicable sections of ISO 11607 including microbial barrier Complies with select ISO 10993 requirements for biocompatibility of medical devices Decreased thermoforming cycle time and energy use Greater design flexibility including durability, easy printing, deep undercuts, long-life hinges, enhanced product protection Greater tear and flex strength than more brittle and crack susceptible HIPS Light blocking and opacity Light weight Styrene-free alternative Made without other materials of concern, including Latex, Butadiene, BPA and bisphenol S (BPS), ortho-phthalates, PVC, halogens Meets environmentally preferable purchasing guidelines Minimal generation of particulates and angel hair when trimmed or cut Minimal stress whitening Provides good heat seal performance to common lidding materials used with copolyesters Surface modifications are not necessary for COF and blocking force control Sustainable LCA -The global warming potential per tray is 0.33 kg CO2-eq/tray made using MP007F Temperature insulating effect&& |
| Product Description | |
|---|---|
| Supplier | Eastman |
| Generic | PCTG |
| Material Status | Commercial: Active |
| Features | Good heat sealing,Renewable resources,Foaming performance,Antimicrobial properties,E-beam disinfection,Biocompatible,Radiation disinfection,Ethylene oxide disinfection,Amorphous |
| Availabilitys | Africa & Middle East ,North America,Europe |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.778 | g/cm³ | ASTM D792 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | ASTM D374 | ||
| — | 60 | µm | |
| — | 1000 | µm | |
| Elastic modulus | |||
| TD | 639 | MPa | ASTM D882 |
| MD | 691 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, yield | 16.0 | MPa | ASTM D882 |
| TD, yield | 16.3 | MPa | ASTM D882 |
| MD, fracture | 18.1 | MPa | ASTM D882 |
| TD, fracture | 18.3 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, yield | 4.4 | % | ASTM D882 |
| TD, yield | 4.4 | % | ASTM D882 |
| MD, fracture | 53 | % | ASTM D882 |
| TD, fracture | 71 | % | ASTM D882 |
| Graves Tear | ASTM D1004 | ||
| MD | 155.0 | kN/m | ASTM D1004 |
| TD | 163.0 | kN/m | ASTM D1004 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Dart impact equipped with measuring instruments | |||
| Max Load | 244 | N | ASTM D3763 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Opaque | 88 | % | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Thickness of Each Eastar™ Copolyester Skin Layer |
| 3. Total Thickness of A/B/A Sheet Tested |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |