Eastar™ AN011, Natural

About
Eastar™ AN011 copolyester is a high flow product. Eastar™ AN011 flow lengths are increased 20-40% relative to Eastar™ AN001 as shown by spiral flow testing. Other outstanding features of Eastar™ are easily maintained such as excellent appearance and clarity, good physical properties, chemical resistance, and easy processing. This high flow product is especially suited for those applications utilizing thin-walled intricate tools. Under existing United States Food and Drug Administration (FDA) regulations, Eastar™ AN011 may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.&&

About

Eastar™ AN011 copolyester is a high flow product. Eastar™ AN011 flow lengths are increased 20-40% relative to Eastar™ AN001 as shown by spiral flow testing. Other outstanding features of Eastar™ are easily maintained such as excellent appearance and clarity, good physical properties, chemical resistance, and easy processing. This high flow product is especially suited for those applications utilizing thin-walled intricate tools. Under existing United States Food and Drug Administration (FDA) regulations, Eastar™ AN011 may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.&&

Product Description
Supplier	Eastman
Generic	PCTG
Material Status	Commercial: Active
Features	Excellent Processability,Good surface appearance,High liquidity,Food contact compliance,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³	ASTM D792
Shrinkage rate
MD	0.30	%	ASTM D955
Water absorption rate
23℃，24hr	0.15	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-40℃	44	J/m	ASTM D256
23℃	80	J/m	ASTM D256
Impact strength of cantilever beam notch			ASTM D4218
-40℃	No Break		ASTM D4218
23℃	No Break		ASTM D4218
Dart impact equipped with measuring instruments			ASTM D3763
-40℃，Energy at Peak Load	38.0	J	ASTM D3763
23℃，Energy at Peak Load	40.0	J	ASTM D3763

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	66.0	℃	ASTM D648
0.45 MPa, unannealed	73.0	℃	ASTM D648
Vicat Softening Temp	86.0	℃	ASTM D1525 2

optical performance	Nominal value	Unit	Test method
Transmittance
total	92.0	%	ASTM D1003
Haze	< 1.0	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Fracture, 23 ℃	43.0	MPa	ASTM D638
Yield, 23 ℃	50.0	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	270	%	ASTM D638
Yield, 23 ℃	5.0	%	ASTM D638
Bending modulus
23℃	1900	MPa	ASTM D790
bending strength
Yield, 23 ℃	68.0	MPa	ASTM D790
Rockwell hardness
R-level	107		ASTM D785

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	70	°C
Drying time	4.0	hr
Processing (melt) temperature	230 to 280	°C
Mold temperature	15 to 30	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.