Eastar™ MB002

About
Eastar™ copolyester MB002 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It is a resin specifically developed for extrusion blow molding containers in medical applications where aesthetics such as high clarity and gloss, coupled with high toughness and chemical resistance, are desirable. Compared to many commonly used materials, Eastar™ copolyester MB002 runs on most standard processing equipment with broader processing conditions, and its toughness and melt strength enable blow molding of larger containers with greater design flexibility. This product meets the biocompatibility requirements under FDA/ISO 10993 and USP Class 6, Plastics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.&&

About

Eastar™ copolyester MB002 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It is a resin specifically developed for extrusion blow molding containers in medical applications where aesthetics such as high clarity and gloss, coupled with high toughness and chemical resistance, are desirable. Compared to many commonly used materials, Eastar™ copolyester MB002 runs on most standard processing equipment with broader processing conditions, and its toughness and melt strength enable blow molding of larger containers with greater design flexibility. This product meets the biocompatibility requirements under FDA/ISO 10993 and USP Class 6, Plastics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.&&

Product Description
Supplier	Eastman
Generic	PCTG
Material Status	Commercial: Active
Features	Good Clarity,Good surface appearance,Biocompatible,Good color stability,High pressure disinfection,Good melt strength,Ultra high toughness,Radiation disinfection,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.25	g/cm³	ASTM D792
Shrinkage rate
MD	0.30	%	ASTM D955
colour			ASTM D2244
a	-0.20		ASTM D2244
b	0.60		ASTM D2244
L	95		ASTM D2244

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-40℃	63	J/m	ASTM D256
23℃	No Break		ASTM D256
Impact strength of cantilever beam notch			ASTM D4218
-40℃	No Break		ASTM D4218
23℃	No Break		ASTM D4218
Dart impact equipped with measuring instruments			ASTM D3763
-40℃，Energy at Peak Load	39.0	J	ASTM D3763
0℃，Energy at Peak Load	41.0	J	ASTM D3763
23℃，Energy at Peak Load	41.0	J	ASTM D3763

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	63.0	℃	ASTM D648
0.45 MPa, unannealed	73.0	℃	ASTM D648
Vicat Softening Temp	85.0	℃	ASTM D1525

optical performance	Nominal value	Unit	Test method
gloss
60°	143		ASTM D2457
Transmittance			ASTM D1003
Regular	87.0	%	ASTM D1003
total	91.0	%	ASTM D1003
Haze	1.3	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	1900	MPa	ASTM D638
tensile strength
Fracture, 23 ℃	48.0	MPa	ASTM D638
Yield, 23 ℃	47.0	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	300	%	ASTM D638
Yield, 23 ℃	5.0	%	ASTM D638
Bending modulus
23℃	1900	MPa	ASTM D790
bending strength
23℃	65.0	MPa	ASTM D790
Rockwell hardness
R-level	105		ASTM D785

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.