Eastar™ MN006 Natural

About
Eastar™ Copolyester MN006 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Copolyester MN006 Natural is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar™ Copolyester MN006 Natural contains a mold release. This polymer is the toughest of the Eastar™ family of products. Additional outstanding features are chemical resistance and excellent color and property retention following gamma and e-beam sterilization. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.&&

About

Eastar™ Copolyester MN006 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Copolyester MN006 Natural is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar™ Copolyester MN006 Natural contains a mold release. This polymer is the toughest of the Eastar™ family of products. Additional outstanding features are chemical resistance and excellent color and property retention following gamma and e-beam sterilization. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.&&

Product Description
Supplier	Eastman
Generic	PCTG
Material Status	Commercial: Active
Features	High impact resistance,Low contractility,E-beam disinfection,Good stripping performance,Good color stability,Radiation disinfection,Solvent resistance
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.23	g/cm³	ASTM D792
Shrinkage rate
MD	0.20 to 0.50	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-40℃	77	J/m	ASTM D256
23℃	No Break		ASTM D256
Impact strength of cantilever beam notch			ASTM D4218
-40℃	No Break		ASTM D4218
23℃	No Break		ASTM D4218
Dart impact equipped with measuring instruments			ASTM D3763
-40℃，Energy @ Max. Load	46.0	J	ASTM D3763
23℃，Energy @ Max. Load	46.0	J	ASTM D3763

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	64.0	℃	ASTM D648
0.45 MPa, unannealed	73.0	℃	ASTM D648

optical performance	Nominal value	Unit	Test method
Transmittance			ASTM D1003
total	92.0	%	ASTM D1003
Regular	89.0	%	ASTM D1003
Haze	< 1.0	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	1800	MPa	ASTM D638
tensile strength
Fracture, 23 ℃	54.0	MPa	ASTM D638
Yield, 23 ℃	44.0	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	330	%	ASTM D638
Yield, 23 ℃	4.0	%	ASTM D638
Bending modulus
23℃	1800	MPa	ASTM D790
bending strength
23℃	66.0	MPa	ASTM D790
Rockwell hardness
R-level	105		ASTM D785

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	71	°C
Drying time	6.0	hr
Processing (melt) temperature	249 to 271	°C
Mold temperature	16 to 38	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.