| About |
|---|
| F61HC is a low IV (0.59 dL/g) homopolymer PET that is readily crystallized by both thermal and mechanical processes. It is a cost-effective option that continues to surpass expectations for quality, efficiency and convenience in a wide array applications.&& |
| Product Description | |
|---|---|
| Supplier | Eastman |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Low Viscosity |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.34 | g/cm³ | ASTM D792 |
| Color a | -0.860 | ASTM E313 | |
| Color b | 0.980 | ASTM E313 | |
| Color L | 93.4 | ASTM E313 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23℃ | 2320 | MPa | ASTM D638 |
| tensile strength | ASTM D638 | ||
| Yield, 23 ℃ | 58.4 | MPa | ASTM D638 |
| Fracture, 23 ℃ | 22.8 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| Yield, 23 ℃ | 3.7 | % | ASTM D638 |
| Fracture, 23 ℃ | 100 | % | ASTM D638 |
| Bending modulus | 2360 | MPa | ASTM D790 |
| bending strength | ASTM D790 | ||
| yield | 85.3 | MPa | ASTM D790 |
| fracture | 70.4 | MPa | ASTM D790 |
| Bending strain | |||
| fracture | 7.0 | % | ASTM D790 |
| yield | 4.2 | % | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 28 | J/m | ASTM D256 |
| Notched impact strength of cantilever beam | |||
| 23℃ | 无断裂 | ASTM D4812 | |
| Dart impact equipped with measuring instruments | ASTM D3763 | ||
| 23℃，Energy at Peak Load | 33.5 | J | ASTM D3763 |
| 23℃，Total Energy | 64.6 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 66.0 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 61.0 | ℃ | ASTM D648 |
| Glass transition temperature | 78.2 | ℃ | DSC |
| Melting temperature | 250 | ℃ | DSC |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 60° | 139 | ASTM D523 | |
| Refractive index | 1.570 | ||
| Transmittance | |||
| total | 84.9 | % | ASTM D1003 |
| Haze | 2.9 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Metricon Model 2010 Prism Coupler |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |