EASYMID A GF30SP BKIG

About
PA66 30%GF PROCESS STABILIZED BLACK

Product Description
Generic	PA66
Material Status	Commercial: Active
Features	Excellent Processability
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.32	g/cm³	ISO 1183
Shrinkage rate
TD	0.70 to 0.90	%
MD	0.30 to 0.50	%
Water absorption rate
23℃，24hr	0.70	%
Saturation, 23 ℃	5.5	%

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	8500	MPa	ISO 527-2
Tensile stress	130	MPa	ISO 527-2
Bending modulus	7500	MPa	ISO 178
Bending stress	200	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	10	kJ/m²	ISO 180-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	220	℃	ISO 75-2/A

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.60-3.20 mm	HB		UL 94

Process Conditions
Injection	Nominal value	Unit	Test method
drying temperature	80 to 90	°C
Drying time	2.0 to 3.0	hr
Processing (melt) temperature	230 to 280	°C
Mold temperature	80 to 100	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.