About |
---|
EBA REPSOL EBANTIX ® E1770 is a copolymer suitable for general extrusion, injection moulding and compounds where good processability, flexibility and very good mechanical properties are required. The butyl acrylate content is 17%. It contains antioxidant additives. Applications: Extrusion (profiles, sheets). Injection moulding. Microcellular foams. Compounds and masterbatches. Cables. Recommended melt temperature 180°C. EBA copolymers exhibit excellent thermal stability, which allows higher processing temperatures if needed. Processing characteristics of E1770 are similar to LDPE and conventional polyethylene extruders are recommended. Processing conditions should be optimised for each production line. |
Product Description | |
---|---|
Supplier | REPSOL |
Generic | EBA |
Material Status | Commercial: Active |
Features | Excellent Processability,Good flexibility,Food contact compliance,Inoxidizability,Copolymer |
Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
Process Methods | Injection Molding |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | |||
23℃ | 0.924 | g/cm³ | ISO 1183 |
Melt Flow Rate | |||
190℃,2.16kg | 7.0 | g/10min | ISO 1133 |
Butyl acrylate composition | 17.0 | wt% | Internal Method |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Vicat Softening Temp | 61.0 | ℃ | ISO 306/A |
Melting temperature | 93.0 | ℃ | Internal Method |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shaw’s A | 90 | ||
Shaw’s D | 33 | ||
Tensile stress (fracture) | 12.0 | MPa | ISO 527-2 |
Tensile strain | |||
fracture | 800 | % | ISO 527-2 |
Process Conditions | |||
---|---|---|---|
Injection | Nominal value | Unit | Test method |
extrusion | Nominal value | Unit | Test method |
Processing (melt) temperature | 180 | °C | |
Melt Temperature | 180 | °C |
Notes |
---|
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |