EBANTIX® PA-24004

About
EBA ALCUDIA® PA-24004 is recommended for injection moulding and blends with other products like waxes or mineral fillers. The butyl acrylate content is 24%. It contains antioxidant and free flowing agent. EBA ALCUDIA® PA-24004 fulfils the food contact regulations in most countries. For further information or certificates, contact our Customer Service Offices. APPLICATIONS Injection moulding Blends with waxes Manufacture of masterbatches Microcellular foams Extrusion of profiles and sheets with high flexibility Recommended melt temperature range is 160 to 180°C. EBA copolymers exhibit excellent thermal stability, which allows higher processing temperatures if needed. Processing characteristics of PA-24004 are similar to LDPE and conventional Polyethylene extruders are recommended.&&

Product Description
SupplierREPSOL
GenericEBA
Material StatusCommercial: Active
FeaturesGood flexibility,Food contact compliance,Inoxidizability,Heat Stabilized
AvailabilitysNorth America,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density0.928g/cm³ISO 1183
Melt Flow Rate
190℃,2.16kg4.0g/10minISO 1133
Butyl acrylate composition24.0wt%

THERMALNominal valueUnitTest method
Vicat Softening Temp47.0ISO 306/A
Melting temperature83.0

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s A83 
Shaw’s D23 
tensile strength
fracture9.00MPaISO 527-2
Tensile strain
fracture820%ISO 527-2

Process Conditions
injectionNominal valueUnitTest method
Processing (melt) temperature160 to 180°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.