Eco-Solutions GP3002

About
Description Eco Solution GP3002 is a PLA (polylactide) based Aliphatic Polyester, and is certified as a biodegradable resin and meet ASTM D6400, EN13432. The processibility and toughness are greatly improved and thus can be leaded in blowing machine readily. A new tougher additive specially developed for bio-based and biodegradable packaging. GP3002, which toughens PLA packaging materials while maintaining compliance with food contact requirements in the U.S. Providing toughness with only minimal reduction in package clarity, this grade is said to allow food marketers to take better advantage of environmentally preferred solutions in packages such as clamshells used in fresh produce sections. Applications Outstanding side sealing and end sealing performance High quality films for automatic packing process Blowing molding for bottles Translucent bags, bakery bags, envelope bags PLA toughner High quality film for lamination&&

About

Description Eco Solution GP3002 is a PLA (polylactide) based Aliphatic Polyester, and is certified as a biodegradable resin and meet ASTM D6400, EN13432. The processibility and toughness are greatly improved and thus can be leaded in blowing machine readily. A new tougher additive specially developed for bio-based and biodegradable packaging. GP3002, which toughens PLA packaging materials while maintaining compliance with food contact requirements in the U.S. Providing toughness with only minimal reduction in package clarity, this grade is said to allow food marketers to take better advantage of environmentally preferred solutions in packages such as clamshells used in fresh produce sections. Applications Outstanding side sealing and end sealing performance High quality films for automatic packing process Blowing molding for bottles Translucent bags, bakery bags, envelope bags PLA toughner High quality film for lamination&&

Product Description
Generic	PLA
Material Status	Commercial: Negative
Features	Good flexibility,Biodegradable,Food contact compliance,Aliphatic series,Compostable
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.26	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	3.5 to 5.6	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
Secant modulus			ASTM D882
MD	965	MPa	ASTM D882
TD	480	MPa	ASTM D882
tensile strength
MD, yield	28.4	MPa	ASTM D882
TD, yield	22.8	MPa	ASTM D882
MD, fracture	47.9	MPa	JIS K6781
TD, fracture	32.5	MPa	JIS K6781
Tensile strain			ASTM D882
MD, fracture	220	%	ASTM D882
TD, fracture	470	%	ASTM D882

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	103	℃	ASTM D1525
Melting temperature	110	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.