| About |
|---|
| Eco-Solutions GP335-13是一种生物可降解聚合物 (Biodeg Polymers)材料,。 该产品在北美洲、欧洲或亚太地区有供货,加工方式为:注射成型。 Eco-Solutions GP335-13的主要特性有: 环保/绿色 耐热 Eco-Solutions GP335-13的典型应用领域为:厨房用具&& |
| Product Description | |
|---|---|
| Generic | 生物可降解聚合物 |
| Material Status | Commercial: Active |
| Features | Biodegradable,Compostable,Heat Resistance, Good |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.50 | g/cm³ | JIS K7112 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 19 | g/10min | JIS K7210 |
| Shrinkage rate | |||
| MD | 0.85 | % | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 39 | J/m | JIS K7110 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 89.4 | ℃ | JIS K7207 |
| Melting temperature | 145 | ℃ | JIS K7121 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 93 | JIS K7202 | |
| tensile strength | JIS K7113 | ||
| yield | 32.8 | MPa | |
| fracture | 22.8 | MPa | |
| Tensile strain | |||
| fracture | 5.7 | % | JIS K7113 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |