About |
---|
Ecoflex® rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex® rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing, or you can choose to mix and dispense using our convenient dispensing cartridges. Cured material is skin safe and certified by an independent laboratory to ISO 10993-10, Biological evaluation of medical devices, Part 10: Tests for irritation and skin sensitization. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion. Ecoflex® rubbers are water white translucent and can be color pigmented with Silc Pig® pigments for creating a variety of color effects. You can also add Smooth-On’s Silicone Thinner® to further lower the viscosity. THI-VEX® silicone thickener can be added by weight to Ecoflex® silicones for brushable aplications. Soft, Softer, Softest . .Ecoflex® rubbers are based on Smooth-On’s Dragon Skin® technology and are currently available in four different hardness’: Shore A-5, Shore 00-10, 00-20, 00-30 and 00-50. They are suitable for a variety of applications including making prosthetic appliances, cushioning for orthotics and special effects applications (especially in animatronics where repetitive motion is required). Ecoflex® 5 has a pot life of 1 minute and a demold time of 5 minutes – Available only in dispensing cartridges. Note: Ecoflex® 00-10 cures with a “tacky” surface.&& |
Product Description | |
---|---|
Generic | 硅酮 |
Material Status | Commercial: Active |
Features | Good Rigidity,Low Viscosity,Low contractility,Good Tensile Strength,Good tear strength,Soft |
Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
Process Methods | casting |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.04 | g/cm³ | ASTM D1475 |
Specific volume | 0.961 | cm³/g | ASTM D1475 |
Shrinkage rate | |||
MD | < 0.10 | % | ASTM D2566 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shaw’s OO | 10 | ASTM D2240 |
elastic body | Nominal value | Unit | Test method |
---|---|---|---|
tensile strength | |||
fracture | 0.827 | MPa | ASTM D412 |
100% strain | 0.0552 | MPa | ASTM D412 |
Tensile strain | |||
fracture | 800 | % | ASTM D412 |
tear strength | 3.85 | kN/m | ASTM D624 |
Electrical performance | Nominal value | Unit | Test method |
---|---|---|---|
Dielectric strength | > 14 | kV/mm | ASTM D149 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
storage stability | 30 | min | ASTM D2471 |
Thermosetting mixed viscosity | 14000 | cP | ASTM D2393 |
stripping time | 240 | min |
Supplementary information | Nominal value | Unit | Test method |
---|---|---|---|
Mixing ratio | 1A:1B by volume | ||
working temperature | -54 to 232 | ℃ |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
2. Die B |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |