| About |
|---|
| ECOGRAN® PEHDI BLEU is a High Density Polyethylene material. It is available in Europe for injection molding. Primary attribute of ECOGRAN® PEHDI BLEU: Chemical Resistant.&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Inoxidizability,Solvent resistance |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 to 0.980 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 3.5 to 7.5 | g/10min | ISO 1133 |
| Water absorption rate | |||
| 23℃，24hr | < 0.20 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 715 to 795 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 14.0 to 24.0 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| yield | 21 to 25 | % | ISO 527-2 |
| fracture | > 600 | % | ISO 527-2 |
| Bending modulus | 560 to 660 | MPa | ISO 178 |
| bending strength | 9.00 to 19.0 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 2.1 to 4.1 | kJ/m² | ISO 179 |
| Charpy Unnotch Impact strength | 无断裂 | ISO 179 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |