| About |
|---|
| EM10080 is biodegradable, bio-polyester designed for use in film applications. Typical applications: Blown film applications&& |
| Product Description | |
|---|---|
| Supplier | Ecomann |
| Generic | PHA |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Good heat sealing,Good Printability,Biodegradable,Compostable |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.27 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 170℃，2.16kg | 5.0 | g/10min | ASTM D1238 |
| Water absorption rate | |||
| balance | < 0.40 | % | ASTM D570 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D882 | ||
| MD, fracture | 25.0 | MPa | ASTM D882 |
| TD, fracture | 20.0 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture | 250 | % | ASTM D882 |
| TD, fracture | 350 | % | ASTM D882 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 80.0 | ℃ | ASTM D1525 2 |
| Melting temperature | 110 to 150 | ℃ | DSC |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Yellowness index | 30 | YI | ASTM D1925 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Rate B (120°C/h), Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |