| About |
|---|
| Ecomass® 4450CI86是一种聚丙烯无规共聚物（PP无规共聚物）材料,含有的填充物为羰基铁粉。 该产品在北美洲有供货,加工方式为:注射成型。 Ecomass® 4450CI86的主要特性有: 共聚物 坚硬 良好的韧性 无毒&& |
| Product Description | |
|---|---|
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good flexibility,Random copolymer,High density,Nontoxicity |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 3.70 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| MD | 0.60 to 1.0 | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 19.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 1.3 | % | ISO 527-2 |
| Bending modulus | 3800 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 7.4 | kJ/m² | ISO 180/A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 76.0 | ℃ | ISO 75-2/B |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 200 to 215 | °C | |
| Mold temperature | 10 to 38 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |