Ecomass® 4703ZD95

About
Ecomass® Compound 4703ZD95. Nontoxic alternative to Lead (Pb), weighting, balancing and radiation shielding applications. Features: High Specific Gravity, Tungsten Powder Filled Polyurethane (TPU).&&

Product Description
Generic	TPU
Material Status	Commercial: Active
Features	Ultra high toughness,High density,Nontoxicity
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	11.0	g/cm³	ASTM D792
Shrinkage rate
MD	0.30 to 0.50	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	662	MPa	ASTM D638
tensile strength	13.8	MPa	ASTM D638
Tensile strain
fracture	12	%	ASTM D638
Bending modulus	800	MPa	ASTM D790
bending strength	23.1	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	270	J/m	ASTM D256

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	0.20	ohms	ASTM D257

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	71 to 93	°C
Drying time	2.0	hr
Processing (melt) temperature	204 to 221	°C
Mold temperature	10 to 27	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.