| About |
|---|
| EcoVid-30GBTFH is a General Purpose Ingeo PLA and bio-composite material blend suitable for Thermoforming processes with a High Heat resistance index. The material, rated for 178F/80°C and could be frozen to -32C°. Mould crystallization will increase the heat deflection from 80C° to 110C°+ depending on the application. Composition: Ingeo PLA content with bio-degradable and HDT additives. Applications: EcoVid-30GBTFH is a heat resistant blend for single use thermoformed disposable food trays, packaging inserts, clamshells, platters, etc.&& |
| Product Description | |
|---|---|
| Generic | PLA |
| Material Status | Commercial: Active |
| Features | Renewable resources,Biodegradable,High Heat Resistance |
| Availabilitys | North America,Europe |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.27 | g/cm³ | ASTM D792 |
| Melt Flow Rate | ASTM D1238 | ||
| 190℃，2.16kg | 6.0 | g/10min | |
| 210℃，2.16kg | 6.0 | g/10min | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 130 | ℃ | ASTM D1525 |
| Melting temperature | 130 to 180 | ℃ | ASTM D3418 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Screw speed | 35 to 65 | rpm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |