EcoVid 43IM - SOLIAO

About
EcoVid-43IM is an injection moulding ambient grade blend with a high molecular weight. The material is a PLA and bio-composite for use in general packaging relating to vegetables, fruit and horticultural applications. The material could be frozen to -32C. Composition: PLA content with bio-degradable additives. Applications: EcoVid-43IM composite may be used in a variety of applications involving injection moulding of Ambient food Trays and Punnets/Food containers, Flower pots, tree protectors, etc.&&

About

EcoVid-43IM is an injection moulding ambient grade blend with a high molecular weight. The material is a PLA and bio-composite for use in general packaging relating to vegetables, fruit and horticultural applications. The material could be frozen to -32C. Composition: PLA content with bio-degradable additives. Applications: EcoVid-43IM composite may be used in a variety of applications involving injection moulding of Ambient food Trays and Punnets/Food containers, Flower pots, tree protectors, etc.&&

Product Description
Generic	PLA
Material Status	Commercial: Active
Features	Renewable resources,Biodegradable,High molecular weight
Availabilitys	North America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.27	g/cm³	ASTM D792
Melt Flow Rate			ASTM D1238
190℃，2.16kg	22	g/10min	ASTM D1238
210℃，2.16kg	80	g/10min	ASTM D1238
Shrinkage rate
MD	0.30 to 0.50	%	ASTM D955

film	Nominal value	Unit	Test method
Oxygen permeability	53		ASTM E380
Water vapor permeability	20.2		ASTM E380

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	130	℃	ASTM D1525
Melting temperature	130 to 180	℃	ASTM D3418

Process Conditions
injection	Nominal value	Unit	Test method
Hopper temperature	145 to 155	°C
Barrel rear temperature	145 to 165	°C
Barrel middle temperature	165 to 195	°C
Barrel front temperature	165 to 195	°C
Nozzle temperature	165 to 180	°C
Back pressure	1.03 to 2.76	MPa
Screw speed	85 to 185	rpm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.