| About |
|---|
| Mineral filled injection molding grade, bio-degradable according to DIN EN 13432, e. g. for stiff packaging applications in food contact. BASF ecovio® IS (Injection Specialty) grade are plastics for articles intended to come onto contact with foodstuffs. These plastics fulfill different food regulatory norms like e. g. FDA, European Food Contact n°2002/72/EC and/or GMP (EC) n°2023/2006.&& |
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | PCTG |
| Material Status | Commercial: Active |
| Features | Biodegradable,Food contact compliance,Compostable |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.47 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 190℃，2.16 kg | 9.00 | cm³/10min | ISO 1133 |
| Shrinkage rate | ISO 294-4 | ||
| 1.0 mm | 0.14 | % | |
| TD | 0.20 | % | ISO 294-4 |
| MD | 0.10 | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 3600 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 4.0 | % | ISO 527-2/50 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, annealed | 55.0 | ℃ | ISO 75-2/B |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 5.0 | hr | |
| Recommended maximum moisture content | 0.080 | % | |
| Hopper temperature | 25 | °C | |
| Barrel rear temperature | 180 | °C | |
| Barrel middle temperature | 185 | °C | |
| Barrel front temperature | 190 | °C | |
| Nozzle temperature | 195 | °C | |
| Processing (melt) temperature | 180 to 205 | °C | |
| Mold temperature | 10 to 40 | °C | |
| Residence Time | < 2.0 | min | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. test box |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |