ECP 104 - SOLIAO

About
A wide range of polymer bases are employed to produce conductive plastics, including the polyolefines, nylons and ABS.Typical applications are illustrated using ECP 104 mineral filled conductive polypropylene which can be used to mould a variety of containers for static sensitive devices and PCB handling equipment. The mineral filler produces rigid mouldings with excellent dimensional stability. Permanently conductive Easily processed on conventional moulding equipment Grades tailored to suit a variety of requirements.&&

About

A wide range of polymer bases are employed to produce conductive plastics, including the polyolefines, nylons and ABS.Typical applications are illustrated using ECP 104 mineral filled conductive polypropylene which can be used to mould a variety of containers for static sensitive devices and PCB handling equipment. The mineral filler produces rigid mouldings with excellent dimensional stability. Permanently conductive Easily processed on conventional moulding equipment Grades tailored to suit a variety of requirements.&&

Product Description
Generic	PP not specified
Material Status	Commercial: Active
Features	Excellent Processability,Good Dimensional Stability,Conductive
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.22	g/cm³	ASTM D792
Shrinkage rate
MD	0.30	%	ASTM D995

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	167	℃	ASTM D648
1.8 MPa, unannealed	154	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness	105	R 级	ASTM D785
tensile strength
23℃	74.0	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	3.2	%	ASTM D638
bending strength
23℃	115	MPa	ASTM D790
Bending modulus
23℃	7800	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	48	J/m	ASTM D256
Notched impact strength of cantilever beam
23℃	214	J/m	ASTM D256

Process Conditions
injection	Nominal value	Unit	Test method
Injection temperature
Central temperature of the barrel	229-246	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.