Edgetek™ BB 000/000 H Natural 70

About
Edgetek™ BB 000/000 H Natural 70 is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in Europe. Applications of Edgetek™ BB 000/000 H Natural 70 include automotive, consumer goods, electrical/electronic applications and industrial applications. Characteristics include: Flame Rated Good Processability Good Stiffness Heat Resistant Impact Resistant&&

About

Edgetek™ BB 000/000 H Natural 70 is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in Europe. Applications of Edgetek™ BB 000/000 H Natural 70 include automotive, consumer goods, electrical/electronic applications and industrial applications. Characteristics include: Flame Rated Good Processability Good Stiffness Heat Resistant Impact Resistant&&

Product Description
Supplier	Polyone
Generic	PC+ABS
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Heat Resistance, Good,Heat Stabilized
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.13	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2000	MPa	ISO 527-1-2
tensile strength	50.0	MPa	ISO 527-2/50
Tensile strain
yield	5.0	%	ISO 527-2/50

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	45	kJ/m²	ISO 180/A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	115	℃	ISO 75-2/A
Vicat Softening Temp	145	℃	ISO 306/A120
Melting temperature	140 to 180	℃

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	HB		UL 94
Glowing wire flammability index
2.0 mm	750	℃	IEC 60695-2-12

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80 to 90	°C
Drying time	2.0 to 3.0	hr
Barrel rear temperature	190 to 200	°C
Barrel middle temperature	200 to 210	°C
Barrel front temperature	210 to 220	°C
Nozzle temperature	220 to 230	°C
Mold temperature	80	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.