Edgetek™ CY8000-20GF/000 NC003

About
20% glass fiber reinforced PBT/ASA alloy&&

Product Description
SupplierPolyone
GenericPBT+ASA
Material StatusCommercial: Active
FeaturesHB
AvailabilitysAsia Pacific
Process MethodsInjection Molding

Technical Data
PHYSICALNominal valueUnitTest method
Density1.37g/cm³ASTM D792
Shrinkage rate0.30 to 0.70%ASTM D955

MECHANICALNominal valueUnitTest method
tensile strength105MPaASTM D638
Bending modulus6100MPaASTM D790
bending strength165MPaASTM D790

IMPACTNominal valueUnitTest method
Impact strength of cantilever beam notch
23℃,3.2mm110J/mASTM D256

THERMALNominal valueUnitTest method
Hot deformation temperature
1.8 MPa, unannealed, 3.2 mm191ASTM D648

Electrical performanceNominal valueUnitTest method
Surface resistivity> 1.0E+13ohmsASTM D257

FLAME CHARACTERISTICSNominal valueUnitTest method
Flame retardant level
3.20 mmHB Internal Method

Process Conditions
injectionNominal valueUnitTest method
Drying temperature80 to 100°C
Drying time4.0 to 6.0hr
Processing (melt) temperature230 to 250°C
Mold temperature70 to 90°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. 0.20 in/min
3. 0.051 in/min
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.