Edgetek™ X4 ET3500-5004 White1

About
The Edgetek™ Engineering Thermoplastic Compounds portfolio covers a broad range of standard and custom-formulated high performance materials. This portfolio includes high-temperature materials for elevated service temperature environments, high-modulus / structural materials for load-bearing and high-strength applications and flame-retardant products. These compounds are based on select engineering thermoplastic resins that are compounded with reinforcing additives such as carbon fiber, glass fiber and glass beads.&&

About

The Edgetek™ Engineering Thermoplastic Compounds portfolio covers a broad range of standard and custom-formulated high performance materials. This portfolio includes high-temperature materials for elevated service temperature environments, high-modulus / structural materials for load-bearing and high-strength applications and flame-retardant products. These compounds are based on select engineering thermoplastic resins that are compounded with reinforcing additives such as carbon fiber, glass fiber and glass beads.&&

Product Description
Supplier	Polyone
Generic	ASA+PC
Material Status	Commercial: Active
Features	Weather resistance is good,Good Dimensional Stability,Low contractility
Availabilitys	Africa & Middle East ,North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.21	g/cm³	ISO 1183
Melt Flow Rate
220℃，10.0kg	10 to 15	g/10min	ISO 1133
Shrinkage rate			ASTM D955
MD	< 0.50	%	ASTM D955
TD	< 0.50	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	2430	MPa	ISO 527-2
tensile strength
Yield, 23 ℃	54.0	MPa	ISO 527-2
Tensile strain
Fracture, 23 ℃	5.2	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	45	kJ/m²	ISO 179
Charpy Unnotch Impact strength
23℃	无断裂		ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	119	℃	ISO 75-2/B
1.8 MPa, unannealed	102	℃	ISO 75-2/A
Vicat Softening Temp
—	128	℃	ISO 306/A
—	116	℃	ISO 306/B

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80 to 90	°C
Drying time	2.0 to 4.0	hr

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.