| About |
|---|
| EEC MD 3804 U is a Polyethylene product. It can be processed by rotational molding and is available in Africa & Middle East or Europe. Applications of EEC MD 3804 U include consumer goods, containers, household applications and tanks. Characteristics include: UV Resistant UV Stabilized&& |
| Product Description | |
|---|---|
| Generic | PE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good |
| Availabilitys | Africa & Middle East ,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.938 | g/cm³ | ISO 1872-1 |
| Apparent density | 0.37 | g/cm³ | ASTM D1895 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 4.0 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 23℃，F50 | 200 | hr | ASTM D1693 |
| Particle size | |||
| Medium | < 500 | µm | ASTM D1921 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 18.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 1400 | % | ISO 527-2 |
| Bending modulus | 750 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 20 | kJ/m² | ISO 179 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Fluidity | 31.0 | sec | ASTM D1895 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |