EL-Lene™ H1000P

About
EL-Lene H1000P is a natural, bimodal technology, high density polyethylene designed as a general base resin for use in coloured resins for pipe and striping applications.&&

Product Description
Supplier	SCG
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Heat Stabilized,High ESCR
Availabilitys	North America,Asia Pacific
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.95	g/cm³	ASTM D1505
Resistance to environmental stress cracking	>= 10000	hr	ASTM D1693
Melt Flow Rate
190℃，5.0kg	0.22	g/10min	ASTM D1238
Oxidation induction time
OIT	>=40	min	ASTM D3895

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	<= -60.0	℃	ASTM D746
Linear coefficient of thermal expansion

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	392	J/m	ASTM D256
Impact strength of cantilever beam notch	304	J/m	ASTM D256
Impact strength of cantilever beam notch	343	J/m	ASTM D256

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	64		ASTM D2240
bending strength
23℃	1000	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.