| About |
|---|
| P756C is a random copolymer polypropylene resin for extrusion coating/lamination process of PP woven cloth.&& |
| Product Description | |
|---|---|
| Supplier | SCG |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good surface appearance,Low shrinkage,Good bond,Random copolymer |
| Availabilitys | North America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 25 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D638 | ||
| TD, yield | 25.4 | MPa | ASTM D638 |
| TD, fracture | 16.0 | MPa | ASTM D638 |
| Bending modulus | 9020 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 146 | ℃ | ASTM D2117 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |