| About |
|---|
| EL-Pro P851JO is a general random copolymer polypropylene resin which has high clarity, high brightness, good processibility and contains anti-static agent suitable for injection molding process.&& |
| Product Description | |
|---|---|
| Supplier | SCG |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,Good surface appearance,Food contact compliance,Low odor,Random copolymer,HB |
| Availabilitys | North America,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 20 | g/10min | ASTM D1238 |
| Shrinkage rate | ASTM D955 | ||
| MD：2.0 mm | 1.3 | % | ASTM D955 |
| TD：2.0 mm | 1.4 | % | ASTM D955 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| 0℃ | 39 | J/m | ASTM D256 |
| 23℃ | 64 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 100 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 50.0 | ℃ | ASTM D648 |
| Embrittlement temperature | -20.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 130 | ℃ | ASTM D1525 |
| Melting temperature | 150 | ℃ | ASTM D2117 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | 84 | ASTM D2457 | |
| Haze | 9.0 | % | ASTM D1003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 80 | ASTM D785 | |
| tensile strength | ASTM D638 | ||
| yield | 31.4 | MPa | ASTM D638 |
| fracture | 19.6 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D638 |
| Bending modulus | 1230 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 230 to 270 | °C | |
| Mold temperature | 25 to 70 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |