Elastocon® 2840PE

About
Elastocon® 2840PE thermoplastic elastomer has been developed for applications that require rubber-like properties and a good surface finish. Elastocon® 2840PE is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 2840PE can be overmolded and/or coextruded onto polyethylene. Elastocon® 2840PE is supplied as ready to use pellets in 50 lb. quantities.&&

About

Elastocon® 2840PE thermoplastic elastomer has been developed for applications that require rubber-like properties and a good surface finish. Elastocon® 2840PE is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 2840PE can be overmolded and/or coextruded onto polyethylene. Elastocon® 2840PE is supplied as ready to use pellets in 50 lb. quantities.&&

Product Description
Generic	TPE
Material Status	Commercial: Active
Features	Weather resistance is good,Good surface appearance
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.890	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	37		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength	2.70	MPa	ASTM D412
100% strain	1.10	MPa	ASTM D412
Tensile strain
fracture	550	%	ASTM D412

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Barrel rear temperature	138 to 160	°C
Barrel front temperature	166 to 182	°C
Nozzle temperature	182 to 204	°C
Mold temperature	16 to 49	°C
Barrel temperature	79	°C
Barrel 1 zone temperature	191	°C
Barrel 5 zone temperature	232	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.