| About |
|---|
| Elastocon® OF75 is a natural thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, high strength properties and a reduced coefficient of friction. Elastocon® OF75 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® OF75 can be overmolded onto polypropylene. |
| Product Description | |
|---|---|
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Weather resistance is good,Low coefficient of friction |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.927 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 0.015 to 0.025 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 75 | ASTM D2240 | |
| tensile strength | 11.57 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 591 | % | ASTM D412 |
| Tensile modulus | |||
| 100% | 4.78 | MPa | ASTM D412 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| Temperature at the rear of the barrel | 166 to 177 | °C | |
| Front temperature of material barrel | 182 to 188 | °C | |
| Nozzle temperature | 193 to 204 | °C | |
| Mold temperature | 21.1 to 37.8 | °C | |
| Back pressure | 0.689 to 1.38 | MPa | |
| Feed temperature | ≤79.4 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |