Elastoflo 45A-300

About
Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. Elastoflo products are available in a wide range of hardness and are naturally “white” in color; making these products highly suitable for bright colored parts. Elastoflo products can be molded or extruded using standard thermoplastic equipment. Elastoflo products are non--hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. Elastoflo products are an ideal choice for single component molded parts as well as over--molding applications. It is fully bondable to polypropylene. Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief Excellent abrasion and tear resistance Soft touch feel Slip resistance Fully weatherable Does not need to be dried before use Easily colorable Fully recyclable Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene&&

About

Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. Elastoflo products are available in a wide range of hardness and are naturally “white” in color; making these products highly suitable for bright colored parts. Elastoflo products can be molded or extruded using standard thermoplastic equipment. Elastoflo products are non--hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. Elastoflo products are an ideal choice for single component molded parts as well as over--molding applications. It is fully bondable to polypropylene. Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief Excellent abrasion and tear resistance Soft touch feel Slip resistance Fully weatherable Does not need to be dried before use Easily colorable Fully recyclable Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene&&

Product Description
Generic	SEBS
Material Status	Commercial: Active
Features	Weather resistance is good,Renewable resources,Moisture resistance,Good Tensile Strength,Good tear strength,Good wear resistance,Soft,Good coloring,Agglomerability
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.890	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 5 seconds	45		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength
yield	6.59	MPa	ASTM D412
Tensile strain
fracture	> 500	%	ASTM D412

Process Conditions
injection	Nominal value	Unit	Test method
Proposed maximum recycled material ratio	40	%

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.