| About |
|---|
| Thermoplastic Polyether Polyurethane Elastomers with outstanding hydrolysis resistance, low temperature flexibility and resistance to micro-organisms. Typical applications Cable jackets, plugs and terminations, spiral tubing, Films, ski-boot shells, ear tags, technical mouldings like mining screens, railway pads, seals.&& |
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | TPU-醚 |
| Material Status | Commercial: Active |
| Features | Hydrolysis stability,Antimicrobial properties,Low temperature toughness,V-2,V-0 |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.14 | g/cm³ | ISO 1183/A |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 20% strain | 2.00 | MPa | DIN 53504 |
| 100% strain | 4.00 | MPa | DIN 53504 |
| 300% strain | 8.00 | MPa | DIN 53504 |
| yield | 40.0 | MPa | DIN 53504 |
| yield | 28.0 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 700 | % | DIN 53504 |
| fracture | 750 | % | DIN 53504 |
| tear strength | 40 | kN/m | ISO 34-1 |
| Compression deformation | |||
| 23℃，72 hr | 20 | % | ISO 815 |
| 70℃，24 hr | 40 | % | ISO 815 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -30℃ | 无断裂 | ISO 179 | |
| 23℃ | 无断裂 | ISO 179 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| — | V-2 | UL 94 | |
| — | V-0 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 3 seconds | 75 | ISO 7619 | |
| Wear amount | 45.0 | mm³ | ISO 4649-A |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| extrusion | Nominal value | Unit | Test method |
| Processing (melt) temperature | 170 to 240 | °C | |
| Mold temperature | 20 to 70 | °C | |
| Melt Temperature | 160 to 220 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. after storage in water at 80°C for 42 days |
| 3. Method Bb, Angle (Nicked) |
| 4. according to wall section |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |