Elastollan® 1185A10M

About

Product Description
Supplier	BASF
Generic	TPU-醚
Material Status	Commercial: Active
Features	Good flexibility,Hydrolysis stability,Antimicrobial properties,Food contact compliance,Low temperature toughness,Good tear strength,Good wear resistance,HB
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.11	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	88		ISO 7619
Shaw’s D	39		ISO 7619
tensile strength	45	MPa	DIN 53504
Tensile modulus
injection molding		MPa	ASTM D412
Bending modulus
injection molding		MPa	ASTM D790
Taber abraser		mg	ASTM D1044
abrasion	60	mm³	ISO 4649

elastic body	Nominal value	Unit	Test method
tensile strength
20% strain	3.5	MPa	DIN 53504
100% strain	7	MPa	DIN 53504
300% strain	12	MPa	DIN 53504
Tensile strain
fracture	600	%	DIN 53504
tear strength	60	kN/m	ISO 34
Compression deformation
23℃，72 hr	35	%	ISO 815
70℃，24 hr	45	%	ISO 815

Process Conditions
Injection	Nominal value	Unit	Test method
extrusion	Nominal value	Unit	Test method
drying temperature	100 to 110	°C	“null”
Drying time	2.0 to 3.0	hr	“null”
Recommended maximum moisture content	0.030	%	“null”
Temperature at the rear of the barrel	190 to 220	°C	“null”
Temperature in the middle of the barrel	190 to 220	°C	“null”
Front temperature of material barrel	190 to 220	°C	“null”
Nozzle temperature	210 to 225	°C	“null”
drying temperature	100 to 110	°C	“null”
Drying time	2.0 to 3.0	hr	“null”
Temperature of material cylinder zone 1	160 to 200	°C	“null”
Temperature of material cylinder zone 3	160 to 200	°C	“null”
Temperature of material cylinder zone 5	160 to 200	°C	“null”
Joint temperature	175 to 200	°C	“null”
Mouth temperature	175 to 205	°C	“null”

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.