Elastollan® C 60 A HPM

About
Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties, very good damping and resilience performance, heat resistance and improved cycle times. Typical applications (Automotive) e.g. sealings, stop dampers, cable jackets.&&

Product Description
SupplierBASF
GenericTPU-酯
Material StatusCommercial: Active
FeaturesHigh Heat Resistance,Elastic
AvailabilitysEurope
Process MethodsExtrusion

Technical Data
PHYSICALNominal valueUnitTest method
Density1.17g/cm³ISO 1183/A

elastic bodyNominal valueUnitTest method
tensile strengthDIN 53504
20% strain0.850MPa
100% strain1.50MPa
300% strain2.00MPa
Tensile strainDIN 53504
fracture1100%
fracture1000%
tear strength40kN/mISO 34-1
Compression deformationISO 815
23℃,72 hr25%
70℃,24 hr43%
100℃,24 hr60%

IMPACTNominal valueUnitTest method
Charpy Notched Impact StrengthISO 179
-30℃无断裂
23℃无断裂

THERMALNominal valueUnitTest method
Vicat Softening Temp70.0ISO 306/A120

MECHANICALNominal valueUnitTest method
Shore hardness
Shore A, 3 seconds63ISO 7619
Wear amount55.0mm³ISO 4649-A

Process Conditions
injectionNominal valueUnitTest method
ExtrusionNominal valueUnitTest method
Processing (melt) temperature190 to 220°C
Mold temperature20.0 to 50.0°C
Melt temperature180 to 230°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. after storage in water for 21 days at 80°C
3. Method Bb, Angle (Nicked)
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.