| About |
|---|
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | TPU-酯 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good wear resistance |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.22 | g/cm³ | ISO 1183/A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 96 | ISO 686 | |
| Shaw’s D | 48 | ISO 686 | |
| Wear amount | 30 | mm³ | ISO 4649 |
| tensile strength | |||
| 300% strain | 22.0 | MPa | ISO 37 |
| 100% strain | 10.0 | MPa | ISO 37 |
| yield | 55.0 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 550 | % | ISO 37 |
| tear strength | 100 | kN/m | ISO 34 |
| Compression deformation | ISO 815 | ||
| 23℃，72 hr | 30 | % | ISO 815 |
| 70℃，24 hr | 40 | % | ISO 815 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30℃ | 20 | J/cm² | ISO 179 |
| 23℃ | No Break | ISO 179 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 175-230 | °C | |
| Mold temperature | 20-70 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |