| About |
|---|
| High transparency, aliphatic polyether polyurethane with outstanding hydrolysis resistance, low temperature flexibility and good resistance to micro-organisms.&& |
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | TPU-醚 |
| Material Status | Commercial: Active |
| Features | Good Clarity,Hydrolysis stability,Antimicrobial properties,Aliphatic series,Low temperature toughness |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.08 | g/cm³ | ISO 1183/A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 3 seconds | 85 | ISO 7619 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 17.0 | MPa | DIN 53504-S2 |
| Tensile strain | |||
| fracture | 550 | % | DIN 53504-S2 |
| tear strength | 70 | kN/m | ISO 34-1 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 115 to 135 | °C | |
| Barrel 2 zone temperature | 120 to 140 | °C | |
| Barrel 3 zone temperature | 125 to 145 | °C | |
| Barrel 4 zone temperature | 130 to 150 | °C | |
| Connector temperature | 125 to 145 | °C | |
| Nozzle temperature | 120 to 140 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method Bb, Angle (Nicked) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |