Elastollan® R 2000

About
Glass fibre reinforced thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties, outstanding impact strength, high stiffness whilst maintaining good elongation, low coefficiant of expansion similar to Aluminium, low shrinkage, good paintability. Typical applications Automotive body and panels and structural door trim parts, under body sealants, technical mouldings e.g. plugs, ski tips.&&

About

Glass fibre reinforced thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties, outstanding impact strength, high stiffness whilst maintaining good elongation, low coefficiant of expansion similar to Aluminium, low shrinkage, good paintability. Typical applications Automotive body and panels and structural door trim parts, under body sealants, technical mouldings e.g. plugs, ski tips.&&

Product Description
Supplier	BASF
Generic	TPU-酯
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,Sprayable,Low contractility
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.37	g/cm³	ISO 1183/A

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore D, 3 seconds	67		ISO 7619
Tensile modulus	2000	MPa	ISO 527-2
tensile strength	65.0	MPa	ISO 527-2/1A/50
Tensile strain
fracture	25	%	ISO 527-2/1A/50

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179
-30℃	10	kJ/m²	ISO 179
23℃	50	kJ/m²	ISO 179
Charpy Unnotch Impact strength			ISO 179
-30℃	110	kJ/m²	ISO 179
23℃	140	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	115	℃	ISO 75-2/A
0.45 MPa, unannealed	138	℃	ISO 75-2/B
Linear coefficient of thermal expansion
MD：23~80℃	2.0E-5	1/℃	DIN 53752-A

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	225 to 245	°C
Mold temperature	50 to 70	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.