Elastollan® SP9324

About

Product Description
Supplier	BASF
Material Status	Commercial: Active

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.21	g/cm³	Internal Method

MECHANICAL	Nominal value	Unit	Test method
tensile strength	30	MPa	Internal Method
elongation at break	600	%	Internal Method
Tensile stress
20%	0.7	MPa	Internal Method
100%	1.7	MPa	Internal Method
300%	3.4	MPa	Internal Method
tear strength	40	N/mm	Internal Method
Wear factor	50	mm³	Internal Method
Shore hardness	60	Shore A	Internal Method

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.