| About |
|---|
| Silicone Rubber, LSR Molded Parts, Technical, Plastics and Rubber Processing Molded Parts, Automotive, Plastics and Rubber Processing Molded Parts, Food Contact, Plastics and Rubber Processing Vibration Dampers, Automotive & Transportation&& |
| Product Description | |
|---|---|
| Supplier | Wacker |
| Generic | 硅酮 |
| Material Status | Commercial: Active |
| Features | Food contact compliance,Good tear strength |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| Uncured Properties | Nominal value | Unit | Test method |
| colour | Clear/Transparent | ||
| Density | 1.13 | g/cm³ | ISO 1183 |
| viscosity | 430 | Pa·s | DIN 53019 |
| Cured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 50 | DIN 53505 | |
| tensile strength | 9.10 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 460 | % | DIN 53504 |
| Compression deformation | 25 | % | DIN ISO 815-B |
| tear strength | |||
| — | 10.0 | kN/m | ISO 34 |
| — | 43.0 | kN/m | ASTM D624B |
| Resilience | 60 | % | DIN 53512 |
| Electrical strength | 23 | kV/mm | DIN IEC 243 |
| Volume resistivity | 5.0E+15 | ohms·cm | DIN IEC 93 |
| Dissipation factor | |||
| 50 Hz | 2.0E-4 | DIN VDE 0303 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |