| About |
|---|
| Silicone Rubber, LSR&& |
| Product Description | |
|---|---|
| Supplier | Wacker |
| Generic | 硅酮 |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| Uncured Properties | Nominal value | Unit | Test method |
| colour | Ivory | ||
| Cured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 44 | DIN 53505 | |
| tensile strength | 5.30 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 430 | % | DIN 53504 |
| Compression deformation | 15 | % | DIN 53517 |
| tear strength | 9.20 | kN/m | ASTM D624-B |
| Resilience | 67 | % | DIN 53512 |
| Electrical strength | 23 | kV/mm | DIN VDE 0303 |
| Volume resistivity | 1.1E+15 | ohms·cm | DIN VDE 0303 |
| Dissipation factor | |||
| 50 Hz | 0.010 | DIN VDE 0303 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |