ELASTOSIL® M 4601 A/B

About
Silicone Rubber, RTV-2 Mold Making, Construction Mold Making, Automotive & Transportation Mold Making, Composites Mold Making, Plastics and Rubber Processing Mold Making, Mold Making&&

Product Description
Supplier	Wacker
Generic	硅酮
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
Uncured Properties	Nominal value	Unit	Test method
colour	Brown
Density	1.13	g/cm³	ISO 2781
viscosity	10	Pa·s	ISO 3219
Curing time	12	hr

Cured Properties	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	28		ISO 868
tensile strength	6.50	MPa	ISO 37
Tensile strain
fracture	700	%	ISO 37
tear strength	> 30.0	kN/m	ASTM D624-B
Linear Shrinkage	< 0.10	%

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.