Elastron® D D100.A72.B

About
A soft, black SBS based thermoplastic elastomer (TPE) compound designed for injection molding applications. Bondable to: PP, EVA, PE&&

Product Description
GenericSBS
Material StatusCommercial: Active
FeaturesBlock Copolymer,Soft,Agglomerability
AvailabilitysAfrica & Middle East ,North America,Asia Pacific,Europe
Process MethodsInjection Molding

Technical Data
PHYSICALNominal valueUnitTest method
Density1.09g/cm³ASTM D792
Shrinkage rate
TD1.5%ASTM D955
MD3.0%ASTM D955

elastic bodyNominal valueUnitTest method
tensile strength
fracture3.50MPaASTM D412
300% strain3.10MPaASTM D412
100% strain2.40MPaASTM D412
Tensile strain
fracture450%ASTM D412
tear strength23.0kN/mASTM D624
Compression deformation
23℃,22 hr25%ASTM D395

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s A72 ASTM D2240

Process Conditions
injectionNominal valueUnitTest method
Proposed maximum recycled material ratio20%
Barrel rear temperature140 to 160°C
Barrel middle temperature145 to 165°C
Barrel front temperature155 to 175°C
Nozzle temperature155 to 185°C
Mold temperature25 to 50°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.