| About |
|---|
| A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family designed for use in medical applications. Bondable to: PP, EVA, PE&& |
| Product Description | |
|---|---|
| Material Status | Commercial: Active |
| Features | Good coloring,Agglomerability,HB,Soft |
| Availabilitys | Asia Pacific,Africa & Middle East ,North America,Europe |
| Process Methods | Extrusion,Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.970 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| MD | 2.3 | % | |
| TD | 1.4 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 65 | ASTM D2240 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| fracture | 6.50 | MPa | ASTM D412 |
| 100% strain | 2.30 | MPa | |
| 300% strain | 4.70 | MPa | |
| Tensile Strain | |||
| fracture | 600 | % | ASTM D412 |
| tear strength | 40.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23℃，22 hr | 18 | % | |
| 70℃，22 hr | 37 | % | |
| 100℃，22 hr | 53 | % |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | HB | UL 94 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Ozone resistance | |||
| Stressed | No Cracks | ASTM D518 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion Molded | Nominal value | Unit | Test method |
| Injection Molding | Nominal value | Unit | Test method |
| Drying temperature | 90.0 | °C | |
| Drying time | 2.0 | hr | |
| Barrel 1 zone temperature | 155 to 165 | °C | |
| Barrel 2 zone temperature | 160 to 180 | °C | |
| Barrel 3 zone temperature | 165 to 185 | °C | |
| Barrel 4 zone temperature | 170 to 190 | °C | |
| Barrel 5 zone temperature | 180 to 210 | °C | |
| Nozzle temperature | 185 to 215 | °C | |
| Drying temperature | 90.0 | °C | |
| Drying time | 2.0 | hr | |
| Proposed maximum recycled material ratio | 20 | % | |
| Barrel rear temperature | 155 to 175 | °C | |
| Barrel middle temperature | 165 to 185 | °C | |
| Barrel front temperature | 170 to 190 | °C | |
| Nozzle temperature | 180 to 210 | °C | |
| Mold temperature | 25.0 to 50.0 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |