| About |
|---|
| A soft, black TPV (EPDM /PP ) material belongs to thermoplastic elastomer (TPE) family with superior UV resistance and excellent compression set. This product is specially designed for weatherseal applications. Bondable to: PP, EVA, PE&& |
| Product Description | |
|---|---|
| Generic | TPV |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Soft,Agglomerability,HB |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.950 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| TD | 1.6 | % | ASTM D955 |
| MD | 2.3 | % | ASTM D955 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 8.50 | MPa | ASTM D412 |
| 300% strain | 4.90 | MPa | ASTM D412 |
| 100% strain | 3.60 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 550 | % | ASTM D412 |
| tear strength | 43.0 | kN/m | ASTM D624 |
| Compression deformation | ASTM D395 | ||
| 23℃，22 hr | 21 | % | ASTM D395 |
| 70℃，22 hr | 39 | % | ASTM D395 |
| 100℃，22 hr | 46 | % | ASTM D395 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 77 | ASTM D2240 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Ozone resistance | |||
| Stressed | No Cracks | ASTM D518 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 90 | °C | |
| Drying time | 2.0 | hr | |
| Proposed maximum recycled material ratio | 20 | % | |
| Barrel rear temperature | 155 to 175 | °C | |
| Barrel middle temperature | 165 to 185 | °C | |
| Barrel front temperature | 175 to 195 | °C | |
| Nozzle temperature | 195 to 225 | °C | |
| Mold temperature | 25 to 50 | °C | |
| Drying temperature | 90 | °C | |
| Drying time | 2.0 | hr | |
| Barrel 1 zone temperature | 160 to 180 | °C | |
| Barrel 2 zone temperature | 165 to 185 | °C | |
| Barrel 3 zone temperature | 170 to 190 | °C | |
| Barrel 4 zone temperature | 185 to 205 | °C | |
| Barrel 5 zone temperature | 190 to 220 | °C | |
| Nozzle temperature | 195 to 225 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |